GTCO QuikRuler - Users Guide - Manual (Page 12)

QuikRuler 12
 The current number of digits setting is displayed on line 2 beneath the flashing
cursor.
 Change the current setting by selecting a number from to on the
QuikRuler Menu.
 Select or choose another option or function.
Setting Tone Options
QuikRuler can sound a tone when you make a selection from the QuikRuler Menu, or when
you press the stylus tip on the digitizer surface, or both. You can opt to turn off the tones
entirely.
 Select
 Choose repeatedly or use and until Select Tones is displayed
on line 1.
 The currently selected tone option is displayed on line 2.
 Use and repeatedly until you see the tone setting that you want to use:
Digits Rt of ‘.’
Select Tones
Select Language
Decimal Pnt Char
Last Character
 Select or choose another option or function.