GTCO QuikRuler - Users Guide - Manual (Page 22)

QuikRuler 22
 Use the function to tell QuikRuler the counting scale. For example, you
might want to count by ones, fives, tens or some other unit. See “Setting the
Counting Scale” earlier for more information.
 Select
 QuikRuler displays the current count.
 To count, select any point on the digitizer surface.
 Or, if you are not in the mode, press the side button on your stylus.
Measuring a Straight Segment
Use the function to measure the length of a straight segment. Follow these
steps:
 Select
 Follow the prompts that QuikRuler displays to select the starting and ending points
of the segment.
 QuikRuler III displays the length of the segment.
 To measure another segment, select its starting and ending points. You do not
have to press first.
 EACH SEGMENT IS AUTOMATICALLY SUMMED WITH PREVIOUS SEGMENTS.
 To start a new sum, press .