Golden Lighting 9106-M1L PW-OPL User Manual
Page 2
9106 PartsInstallation-121208.xls
For Customer Service, contact the place of purchase to arrange for replacement parts.
Fixture Name:
9106-M1L PW
G
H
I
J
F
3. Pull the fixture’s wire through the Rods.
4. Thread Rod (J) into Frame (K) until tight.
5. Thread Rod (I) into Rod (J) until tight. repeat for
any additional rods.
6. Feed the fixture wires through the Canopy (G) and
pull the wires until taut.
7. Thread Canopy (G) into Rod (H) until tight.
* You may now install the fixture.
Note: Complete these remaining steps after the
fixture is hung.
8. Slide the Shade (N) on the Socket(M) and secure
by screwing tightly the Socket ring (L).
9. Install the light bulbs in accordance with the
fixture's specification.
(DO NOT EXCEED MAXIMUM WATTAGE RATING!)
K
M
N
L