Golden Lighting 9106-M1L PW-OPL User Manual
Parts & assembly sheet, Parts list, Continued
9106 PartsInstallation-121208.xls
Mounting Strap
Mounting screw
Mounting screw
1ea L104*W24*H11mm
2ea 8/32-IP*H1"
2ea 5/32-IP*H1"
Hex nut
Wire connnector
Finial
2ea 5/32-IP*H3mm
3 ea A3 Orange
2ea 3/8-IP*H9mm
Canopy
Rod
Rod
1ea ∮127Dia*H20mm
3ea 12.7mmDia* H12“
1ea 12.7mmDia* H6”
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
Fixture Name: Taylor 9106-M1L PW
This fixture assembled PO:__________ Date: ________
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
Read and review installation instruction sheet, but do not
install before assembling the fixture.
9106-M1L PW
1. By measuring determine correct number of rods needed for
proper hanging height.
* This fixture includes 4 rods (6", 12", 12", 12")
2. To shorten the fixture; slide the excess rods off the wires.
To lengthen add additional rods.
NOTE: I
NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
For Customer Service, contact the place of purchase to arrange for replacement parts.
PARTS & ASSEMBLY SHEET
continued
These three Rods
may be removed
or
additional Rods
may be added.
G
H
I
J
F