Golden Lighting 8995-M1L SBZ User Manual
Parts & assembly sheet, Parts list

8995Series instructions_20120522m.xls
1ea ∅5"*H1"
2ea 8#32-IP*1"
3ea P3 Orange
2ea 5/32-IP*1-1/2"
2ea 5/32-IP*H3mm
3ea ∅12.5*H12"
1ea ∅12.5*H6"
2ea 5/32-IP*H9mm
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
4. Place the Glass Shade (J) over the Threaded Socket (I)
and secure by threading the Socket Ring (K) to Threaded
Socket (I) until tight.
5. Install the light bulb in accordance with the fixture's
specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING)
For Customer Service, contact the place of purchase to arrange for replacement parts.
Read and review installation instruction sheet before
assembling the fixture.
8995-M1L SBZ
1. By measuring determine correct number of rods needed
for proper hanging height. There are 3 optional 12" rods
and 1 6" rod included. To shorten the fixture slide the extra
rods off the wire. To lengthen the fixture thread the
additional rods onto the wire.
2. Pull the fixture's wire through the Rods (G).
3. Thread Rod/rods (G) into Fixture frame (H) turning until
tight, repeat for the additional rods. Thread the Swivel
assembly (F) to the Rod (G).
Fig 1
NOTE: I
NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
Mounting Strap
Rod
Rod
Deco Nut
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
Wire connectors
Mounting Screws
Hex Nut
This fixture assembled PO:__________ Date: ________
PARTS & ASSEMBLY SHEET
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing
or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
Fixture Name: Woodbriar 8995-M1L SBZ
1ea ∅4"*H2mm
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
Canopy
Mounting Screws
These two Rods may
be removed
or
additional Rods may
be added.
ROD-12 DNI *
*available for purchase
separately