Golden Lighting 8981-SF GRM - Manual

Canopy Hex nut Nipple
1ea 130*H22mm 1ea 1/2"*H3mm 1ea 1/2"*H55mm
Chain Wire connectors Bottom cap
1ea 3.8mm*L72" 4ea A3 Orange 1ea 50*H56mm
Chain connector Mounting Screw Finial
2ea 5*H58.5mm 4ea 8/32"*H1" 1ea 22*H40mm
Hex nut Mounting screws
Mounting Strap
2ea 5/32"*H3mm 2ea 5/32"*H1" 1ea
Mounting Strap w/
ground screw
Canopy Loop and
Canopy loop collar
1ea 100*22*H4mm
/1ea 8/32"*H10mm
1ea 1/2"*H46mm
Crystal draping
A3 x 3pcs Crystal drops
B1 x 9pcs Crystal drops
B4 x 3pcs Crystal drops
C1 x 3pcs Crystal drops
D2 x 1pcs
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
1. Feed the fixture wires through the long Threaded rod
(F)and pull the wires until taut.
2. Slide the tube (E), tube lid (D), cup (C), long Threaded
rod (F), Top cap (B), Top loop(A) down to housing of
fixture.
(Do not use Top loop (A) if installing as Semi flush.)
3. Screw Threaded rod (F) all the way into the coupler (L) at
housing of fixture .
Fig 1
NOTE: THE SHADE ASSEMBLY CAN BE DAMAGED BY
ROUGH HANDLING. USE CARE WHEN ASSEMBLING.
For Customer Service, contact the place of purchase to arrange for replacement parts.
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture.
8981-SF BRI / GRM
Crystal drops are included in parts
bag. (see crystal assembly
instruction)
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
PARTS & ASSEMBLY SHEET
Fixture Name: Echelon 8981-SF BRI / GRM
This fixture assembled PO:__________ Date: ________