Golden Lighting 8118-M1L PW - Manual

1ea ∅6"*H1-3/4" 2ea 8#32-IP*1" 1ea 1/8-IP*H60mm
1ea 1ft 3.8mm 3ea P3 Orange 1ea 1/4-IP*H75mm
2ea 5.8*H61mm 1ea 1-1/4"*H42mm 1ea W4-1/8"*E1"*H5mm
3ea 1/8-IP*H305mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
For Customer Service, contact the place of purchase to arrange for replacement parts.
Wire connectors Nipple Chain
F IXTURE A SSEMBLY I NSTRUCTIONS
12" Rod
Chain connector
Canopy loop
with Collar
Mounting strap
ASSEMBLING THE FIXTURE (Fig.1)
1. By measuring determine correct number of
rods and chain needed for proper hanging height.
There is 1foot of chain and 2 optional 12" rods
included.
2. To shorten the fixture slide the excess 12" rods
off the wire.
3. To lengthen the fixture thread the additional
rods onto the wire or substitute longer chain for
the 1 foot length included.
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
Read and review installation instruction sheet
before assembling the fixture.
8118-M1L PW
Canopy Mounting Screws Top loop
PARTS & ASSEMBLY SHEET
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note on this sheet and contact the place of purchase to arrange for replacement
parts.
Fixture Name: Alston Place 8118-M1L PW
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
This fixture assembled PO:__________ Date: ________
These two Rods may
be removed
or
additional Rods may be
added.*
additional chain may be
added.*
*available for purchase
separately