Golden Lighting 8118-6 PW - Manual

1ea ∅6"*H1-3/4" 2ea 8#32-IP*1" 1ea 1/4-IP*H60mm
1ea 6ft 3.8mm 3ea P3 Orange 1ea 1/4-IP*H75mm
2ea 5.8*H61mm 1ea 1-1/4"*H42mm 1ea W4-1/8"*E1"*H5mm
1ea D 1-1/2"*H5mm 1ea D2-1/4"*H42mm 1ea 1-1/2"*H5mm
1ea D1-1/4"*H49mm 1ea 1/8-IP*H55mm 1ea 4"*H504mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
ASSEMBLING THE FIXTURE (Fig.1)
1. Thread the Center Column (L1) to connector (R) till
tight.
2. Feed the fixture wires through the Top loop (J) and pull
the wires until taut.
3. Then screw the Top Loop (J) to the threaded center
column of Frame (M) until tight.
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
Read and review installation instruction sheet before
assembling the fixture.
8118-6 PW
For Customer Service, contact the place of purchase to arrange for replacement parts.
PARTS & ASSEMBLY SHEET
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
Fixture Name: Alston Place 8118-6 PW
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
This fixture assembled PO:__________ Date: ________
Canopy Mounting Screws Top loop
Canopy loop
with Collar
Mounting strap
Chain Wire connectors Nipple
Chain connector
Bottom cap (T) Crystal ball Bottom cap (W)
F IXTURE A SSEMBLY I NSTRUCTIONS
Finial Nipple
Center column