Golden Lighting 8118-1W PW - Manual

8118-1W BUSPartsInstallation_20111007m.xlsx
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
For Customer Service, contact the place of purchase to arrange for replacement parts.
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet,
but do not install before assembling the
fixture.
8118-1W BUS
1. Slide the Glass Shade (J) over Socket ( I)
and secure Glass Shade (J) by threading the
Socket Ring (O) to Socket (I) until tight.
2. Install the light bulb in accordance with the
fixture's specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING!)
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
Wire connectors Mounting Screws Hex Nut
3ea P3 Orange 2ea 5/32-IP*1-1/2" 2ea 5/32-IP*H3mm
Mounting Strap Mounting Screws Deco Nut
1ea ∅4"*H2mm 2ea 8#32-IP*1" 2ea 5/32-IP*H9mm
PARTS & ASSEMBLY SHEET
Fixture Name: Alston Place 8118-1W BUS
This fixture assembled PO:__________ Date: ________
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note on this sheet and contact the place of purchase to arrange for replacement
parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer