Golden Lighting 8106-FM CDB User Manual

Parts & assembly sheet, Parts list

Mounting
strap

Mounting
screws

Wire connectors

1ea W25*100L*11H*1.5t

2ea 8/32T*1-1/4"L

3ea Orange

Hex nut

Finial

Green screws

2ea Φ9*3.5tmm

1ea Φ29*44hmm

1ea Φ9*10mm

Nipple

Bottom cap

Rubber washer

1ea Φ12*125mm

1ea Φ70*11H*0.6t

1ea Φ18*1.0t

Part Needed

Quantity

Part Needed

Quantity

Reason why

( missing, scratched, broken glass, bent, bad finish)

Comments

Notice:

Please review the parts listing and check for all parts before assembling the fixture. If any parts are

missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement
parts.

PARTS LIST

Company Name:_______________________Co. Account #:_____________
to be filled out by retailer

PARTS & ASSEMBLY SHEET

This fixture assembled PO:__________ Date: ________

Fixture Name: Torbellino 8106-FM CDB

IXTURE

SSEMBLY

NSTRUCTIONS

For Customer Service, contact the place of purchase to arrange for replacement parts.

NOTE: I

NSTALL THE GLASS ASSEMBLY

AFTER THE FIXTURE IS HUNG.

1. Thread the Nipple (G) into the Coupling (E), and

then thread the Hex Nut (F) onto Nipple (G) until tight.

2. Install the light bulbs in accordance with the fixture's

specifications.

3. Place Glass Shade (H) over the Ceiling Pan (D).

The Nipple (G)shall protrude the bottom hole of the

Glass Shade (H).

4. While holding the Glass Shade (H) slide washer(J)

over Nipple (G) and thread Hex nut (K) until tight.

5. Slide Bottom Cap (L) over Nipple (G) and thread the

Finial (M) until tight.

(DO NOT EXCEED THE MAXIMUM WATTAGE RATING)

Fig 1

8106-FM CDB

Read and review installation instruction sheet
before assembling the fixture.