Golden Lighting 8063-9 BUS - Manual (Page 2)

Canopy 1ea
Mounting
Screws
2ea Canopy loop 1ea
Chain 6ft
Wire
Connectors
3ea
Bottom small
cap
2ea
Chain
connector
2ea
Canopy Loop
Collar
1ea
Nipple-A
Nipple-B
1ea
Mounting
Strap
1ea Hex Nut 3ea
Bottom
assembly
1ea
Mounting
screws
2ea
Wire
connectors
2ea Finial 1ea
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Heartwood 8063-9 BUS
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any
parts are missing or damaged, please note onthis sheet and contact the place of purchase to
arrange for replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_________
to be filled out by retailer
F IXTURE A SSEMBLY I NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
ASSEMBLING THE FIXTURE (Fig.1)
1. Feed the fixture wires through the Top loop
(J) and pull the wires until taut.
2.Then screw the Top Loop (J) to the threaded
center column of Frame (M) until tight.
8063-9 BUS
Read and review installation instruction sheet
before assembling the fixture.
Fig 1