Installation instructions – Golden Lighting 8063-13 BUS User Manual

Page 2

INSTALLATION INSTRUCTIONS

Fixture Name: Heartwood 8063-13 BUS

For Flush Mount Light Fixture

Fig. 3

For Customer Service, contact the place of purchase to arrange for replacement parts.

WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.

Fig. 1

Fig. 2

HANGING THE FIXTURE (Fig. 1)
1. Carefully remove the new fixture from the carton and
the yellow bag that holes all your parts. Check that all
parts are included as shown in the illustration and parts
list.
2. Shut off power at the circuit breaker and remove the old
fixture from ceiling, including the old mounting strap.
3. The Mounting strap (B) contains several pairs of
threaded holes, find the pair of holes that match the holes
spacing in your Canopy (E) and thread the two Mounting
screws (A) into the Mounting strap (B), secure with Hex
nuts (D).
4. Place the Mounting strap (B) over the Junction box so
the Mounting screws (A) are vertical or horizontal, as
required by fixture type.
5. Attach the Mounting strap (B) to the Junction box by
using the two Mounting screws (C). Tighten the screws
securely with screw driver!!

CONNECTING THE WIRES (Fig. 2)

6. Attach the power supply wires to the fixture lead wires

by connecting BLACK to BLACK (or SMOOTH) and

WHITE to WHITE (or RIBBED).

7. Attach the ground wire (GREEN or COPPER) from the

Junction Box and the fixture ground wire to the green

Ground screw on the Mounting strap (B) or connect both

wires together using the correct size of wire connectors.

NOTE: Twist the wires together in the same direction you

twist the wire connector onto the wires.

8. TucK these wire connections neatly into the Junction

Box.

FINISHING THE INSTALLATION (Fig. 3)

9. Raise the Ceiling pan (E) against the ceiling and tighten

with Deco nuts (G).

10. Install the light bulbs in accordance with the fixture's

specifications and install the glass assembly as per

Assembly instructions.

YOUR INSTALLATION IS NOW COMPLETE, RETURN

POWER TO THE JUNCTION BOX AND TEST THE

FIXTURE.

BARE COPPER

(or Green)

GREEN
(Ground)

FIXTURE WIRES

SMOOTH ( or BLACK)

RIBBED ( or WHITE)

BLACK
(Hot)

WHITE
(Netural)

HOUSE WIRES

F
G