Golden Lighting 8063-13 BUS - Manual

Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
2ea 3/8"*H3mm 1ea Ø65*H25mm 1ea Ø16*H12mm
1ea #8-32N*10mm 2ea 5/32"*H40mm 2ea 5/32-IP*H3.5mm
2ea 5/32"*H9mm 1ea 3/8-IP*H80~95mm
Deco nut Nipple
Bottom cap Finial Hex Nut
Mounting strap Junction box screws Wire connectors
Green ground screw Mounting Screws Hex Nut
1ea 4"*H1.5mm 2ea #8-32N*18mm 2ea P3 Orange
PARTS & ASSEMBLY SHEET
Fixture Name: Heartwood 8063-13 BUS
This fixture assembled PO:__________ Date: ________
Notice : Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
For Customer Service, contact the place of purchase to arrange for replacement parts.
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture.
8063-13 BUS
1. Thread the Nipple (H) into the Ceiling pan coupler (F)
and secure with Hex nut attached.
2. Install the light bulbs in accordance with the fixture's
specifications.
3. Place the Glass shade (I) over the Ceiling pan (E)
allowing the Nipple (H) to protrude through the bottom
hole in the glass tighten with Hex Nut (J), slide Bottom
cap (K) over Nipple (H) and tighten with Finial (L)
(DO NOT EXCEED MAXIMUM WATTAGE RATING!)
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
K
J
I
F
H
G
E
L
8063-13PartsInstallation_20100930m.xls