Golden Lighting 6068-SF GMT - Manual

6068 Series Instructions_20111103m.xls
1ea ∅5"*H3/4" 2ea 8#32-IP*1"
3ea P3 Orange 2ea 5/32-IP*1-3/5" 2ea 5/32-IP*H3mm
3ea ∅11.7*H12" 1ea ∅11.7*H6" 2ea 5/32-IP*H10mm
2ea 5/32-IP*8MM
Part Needed Quantity
Part Needed
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
Rod
For Customer Service, contact the place of purchase to arrange for replacement parts.
Read and review installation instruction sheet before
assembling the fixture.
6068-SF GMT
1. By measuring determine correct number of rods needed
for proper hanging height.
* This fixture includes 4 rods (6", 12", 12", 12")
2. To shorten the fixture; slide the excess rods off the
wires. To lengthen add additional rods. The 12" rods are
optional.
3. Pull the fixture’s wires through the rods (G) until taut and
thread the rods together. Then thread to the fixture coupler
(W) at base of fixture and the swivel joint on Canopy. (F)
4. Insert the Steel wire rope (R) to hole at top of square
frame（T）and secure in place with Set Screws（S）until
tight.
5. Adjust the level of the frame (T) with the wire length.
Depress the cylinder lock at top cap to release wire.
6. Install the light bulbs in accordance with the fixture's
7. Place the Glass Shade (J) over the Socket (I).
specification.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!) Fig 1
F IXTURE A SSEMBLY I NSTRUCTIONS
PARTS LIST
Mounting Screws
to be filled out by retailer
Canopy Mounting Screws Mounting Strap
Rod
Company Name:_______________________Co. Account #:_____________
Deco Nut
This fixture assembled PO:__________ Date: ________
PARTS & ASSEMBLY SHEET
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing
or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
Fixture Name: Marco 6068-SF GMT
Wire connectors Mounting Screws Hex Nut
1ea ∅4"*H2mm