Golden Lighting 6068-8 GMT - Manual

6068 Series Instructions_20111103m.xls
1ea ∅5-1/4"*H20MM 2ea 8#32-IP*1" 1ea 1/8-IP*H62mm
1ea 6ft ∅4.2 3ea P3 Orange 1ea 1/4-IP*H60mm
2ea ∅5.8*H61mm 1ea ∅1-1/8"*H42mm 1ea W4-1/8"*E1"*H5mm
3ea 8#32-IP*8MM
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
Fixture Name: Marco 6068-8 GMT
Chain connector
Canopy loop
with Collar
Mounting strap
Chain
Mounting Screws
Top loop
This fixture assembled PO:__________ Date: ________
PARTS & ASSEMBLY SHEET
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are
missing or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement
parts.
Wire connectors Nipple
ASSEMBLING THE FIXTURE (Fig. 1)
1. Thread the Center Column to connector (W) until
tight.
2. Insert the Steel wire rope (R) to hole at top of
square frame（T）and secure in place with Set
Screws（S）until tight.
3. Adjust the level of the frame (T) with the wire length.
Depress the cylinder lock at top cap to release wire.
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
Read and review installation instruction sheet
before assembling the fixture.
6068-8 GMT
PARTS LIST Company Name:_______________________Co. Account #:____________
to be filled out by retailer
Canopy Mounting screws
For Customer Service, contact the place of purchase to arrange for replacement parts.
F IXTURE A SSEMBLY I NSTRUCTIONS
Center
column