beautypg.com

Golden Lighting 4002-9 RSB User Manual

Parts & assembly sheet, Parts list

background image

Canopy

1ea

Mounting

Screws

2ea

Nipple

(70mm)

1ea

Chain

6ft

Wire

Connectors

3ea

Nipple

(30mm)

1ea

Chain

connector

2ea

Canopy Loop 1ea

Bottom Cap 1ea

Mounting

Strap

1ea

Hex Nut

2ea

Finial

1ea

Part Needed

Quantity

Part Needed

Quantity

Reason why ( missing, scratched, broken glass, bent, bad finish)

Comments

F

IXTURE

A

SSEMBLY

I

NSTRUCTIONS

For Customer Service, contact the place of purchase to arrange for replacement parts.

NOTE: I

NSTALL THE GLASS ASSEMBLY

AFTER THE FIXTURE IS HUNG.

1. Pull the wires up and slide the center column (A)

into the center of main frame. There is no

threading, there is no coupler.

2. Then hang decorative arms(3ea) (B) onto the

center column (A) and frame. Tuck the narrow S

curve into the top loop facing out and then the wide

S curve will slide into the loop at the bottom of

frame. These arms will support the weight of the

fixture, not the center column.

Fig 3

4002-9 RSB

Read and review installation instruction sheet

before assembling the fixture.

PARTS & ASSEMBLY SHEET

This fixture assembled PO:__________ Date: ________

Fixture Name: Loretto 4002-9 RSB

Notice:

Please review the parts listing and check for all parts before assembling the fixture. If

any parts are missing or damaged, please note onthis sheet and contact the place of purchase

to arrange for replacement parts.

PARTS LIST

Company Name:_______________________Co. Account #:________

to be filled out by retailer

G

F

C
D

E

A

B

Table of contents