Golden Lighting 3711-M1L CB - Manual

1ea ∅6-1/2"*H1-1/2" 2ea 8#32-IP*1" 1ea 1/8-IP*H77mm
1ea 2ft ∅3.8 3ea P3 Orange 1ea 1/4-IP*H60mm
2ea ∅5.8*H61mm 1ea ∅1-1/8"*H42mm 1ea W4-1/8"*E1"*H5mm
3ea ∅11.7*H12"
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
Read and review installation instruction sheet before
assembling the fixture.
2488-M1L FI & 3711-M1L CB
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
PARTS & ASSEMBLY SHEET
Fixture Name: Rockefeller 2488-M1L FI & 3711-M1L CB
This fixture assembled PO:__________ Date: ________
Canopy Mounting Screws Top loop
Chain Wire connectors Nipple
Rod
F IXTURE A SSEMBLY I NSTRUCTIONS
ASSEMBLING THE FIXTURE (Fig.1)
1. By measuring determine correct number of rods and
chain needed for proper hanging height. There are 2 ft
of chain and 2 optional 12" rods included.
2. To shorten the fixture slide the excess 12" rods off
the wire.
3. To lengthen the fixture thread the additional rods
onto the wire or substitute longer chain for the 2 foot
length included.
For Customer Service, contact the place of purchase to arrange for replacement parts.
Chain connector
Canopy loop
with Collar
Mounting strap
These two Rods may
be removed
or
additional Rods may be
added.
ROD-12 CB or FI *
additional chain may
be added.
CHAIN-CB or FI *
*available for purchase
separately
24883711-PartsInstallation_20110105m.xls