Golden Lighting 3711-WSC CB - Manual

Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
Wire connectors Nipple Hex Nut
1ea 4-1/8-IP*H2mm 2ea 8#32-IP*1" 1ea 1/8-27-IP*H15mm
For Customer Service, contact the place of purchase to arrange for replacement parts.
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet, but
do not install before assembling the fixture.
2488-WSC FI & 3711-WSC CB
1. Thread on the nipple (17) in this order:hex nut,
metal washer (18), plastic washer (19), glass
shade (16) thread the nipple through the hole in
bottom of glass shade, plastic washer, metal
washer, hexnut (20) ,bottom cap (21) and secure
in place with the Finial (22).
2. Place the glass shade (16) into the fixture frame
(15), level the glass.
3. Install the light bulb in accordance with the
fixture's specifications.
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
3ea P3 Orange 1ea 1/8-27-IP*1-3/4"
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing
or damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
3ea 1/8-27-IP*H3mm
Mounting Strap Mounting Screws Metal Cap Nut
PARTS & ASSEMBLY SHEET
Fixture Name: Rockefeller 2488-WSC FI & 3711-WSC CB
This fixture assembled PO:__________ Date: ________
1ea 1/8-27-IP*2-1/8"
Nipple (17)
*may have washers,
hex nuts attached Finial
1ea 1/8-27-IP*H27mm
Bottom Cap
1ea ∅2-1/2"*H1-1/2"