Golden Lighting 1993-5 PS - Manual

Canopy Wire Connectors Top Loop
1ea D150*H34mm 3ea A4 Orange 1ea
Chain
Junction Box
Screw
Spring Washer
1ea 6ft x3.8mm 2ea 8/32" x 1" 1ea @15 x 2mm
Chain Connector Nipple
2ea @4.2X50mm 1ea @3/8 x 40mm x 5mm 1ea @3/8 x 455mm
Mounting Strap
w/ ground screw
Hex Nut
1ea 3/4"X4" 2ea @3/8 x 3mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
For Customer Service, contact the place of purchase to arrange for replacement parts.
Canopy Loop
with Collar
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet before
assembling the fixture.
1993-5 PS
Note: The wire cage and fabric shade are
already assembled on the fixture body
1. Thread the nipple (N) into the coupling of
fixture body (O).
2. Place the top cap (M) over the nipple (N)
and secure it by threading the Top loop (J) on
until snug..
Fig. 1
PARTS & ASSEMBLY SHEET
Fixture Name: Joia 1993-5 PS
This fixture assembled PO:__________ Date: ________
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer