Galaxy Audio DS-SP36 User Manual
Page 15
14
– User Password: from the “User Password” sub-menu:
Press “ENTER” to access the “User Password” page:
Using the PM2 or PM3 encoders to choose a character and the “NAV/PM1” encoder to move between
available locations, you can enter a 6 Character Password Name.
The current position of the cursor for the characters to be entered is shown by a “blinking underscore”.
During this editing phase, the display is as follows if we were using “DSSP36” as the password:
The DS-SP36 will exit the “Unit Lock” sub-menu and jump to the “User Password” sub-menu page screen:
If the password entered in the “Confirm Password” page matches the one entered in the “Enter Password”
page, the following screen will appear:
The Password is now configured and held in the device’s memory.
The user can now decide to “lock” the DS-SP36 by Password, inhibiting the access to ALL processor
functions depending on the setting of the parameter “Password Enable/Disable”, explained in the following
paragraph.
SECURITY UTILITY
– User Password –
User Password
[ ]
User Password
[ DSSP36 ]
Confirm Password
[ DSSP36 ]
SECURITY UTILITY
– Insert Password –