Galaxy Audio DS-SP36 User Manual

Page 13

For example, if we want to delete the preset 10, “Stage 1 2x2”, the screen will show the following:

Confirm the deletion by pressing “ENTER” again. This will force the DS-SP36 to erase the selected preset
and the following transition screen will appear:

Once the preset is deleted, the above screen will disappear, returning to the following screen:

Note: At any time it is possible to quit the deleting action by pressing the “ESC” button.

Interface Utilities Sub-menu – this sub-menu allows you to define the remote control interface
[USB or RS485] to be used for controlling the DS-SP36 :

From “Interface Utilities”, press “ENTER” to access the Interface Setup.

– Interface Setup: this screen allows you to choose the remote control protocol for the DS-SP36.

By pressing “ENTER” and then using the PM2 or PM3 encoders you can choose between the two possible
interfaces (USB or RS485 ) for the DS-SP36.
Pressing ENTER on a selected source will make an asterisk appear to the right of the description on the
LCD, as in the following example which shows the selected interface as USB.

[Enter] to Delete

10: Stage 1 2x2

Erasing Xover Memory.....

10: Stage 1 2x2

PROGRAM UTILITY

– Delete a Program –

UTILITY MENU

– Interface Utilities –

INTERFACE UTILITY

– Interface Setup –

Interface Setup

Source: USB