Iej p, Pip c, Onnections – Philips 54XP43C/37 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
M
ore
PIP C
onnections
iEJ
P
ip
hookup with Cable
Converter Box and VCR.
(BEGIN)
First use an optional signal
splitter and connect the original
cable TV signal to both the
CABLE IN on the Cable Converter
and the ANTENNA plug on the
rear of the TV.
Connect the CABLE OUT on
the Converter to the ANT. IN on
the VCR.
REAR OF TV
Connect the VIDEO OUT
jack on the VCR to the VIDEO
IN jack on the TV.
Also connect the AUDIO OUT (R
and L) jacks from the VCR to the
AUDIO IN jacks on the TV.
Remember g
to use the Cable TV
Converter Box to
select channels for
PIP, the VCR must
be set to the same
channel as the
channel selection
switch on the rear of
the Cable Converter
(either channel 3 or
4).
SPLITTER
Contact the Parts
Information Center
1 800 292-6066
to order any optional
CABLE TV CONVERTER
47