Using the remote's vcr buttons, Record button, Rewind button – Philips 54XP43C/37 User Manual
Page 41: Pause button, Tv-vcr button, Play button, Stop button, Fast forward button, Channel scan buttons, Number buttons
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
U
sing
the
R
emote
'
s
VCR
B
uttons
W
hen using the TV rem ote
with a VCR, first m ake
certain it is set to control your
VCR ( by the REM OTE COD E or
SEARCH method
-
see earlier
section),
G
<
2
>
Press the VCR System
button on the remote.
toward the front of the VCR
(remote sensor window) when '
pressing buttons.
Record Button
Hold the RECORD button down, and
then press the PLAY button to begin
a VCR recording.
Rewind Button
Press to rewind tapes. For some
VCRs you may need to press STOP
button first then REWIND. In
playback mode, hold button down to
view picture moving rapidly in
reverse.
Pause Button
Press to temporarily stop the tape dur
ing a playback, or recording. Press
again to release Pause.
TV-VCR Button
Press to the VCR position ("VCR"
indicator on the VCR will light) to
view the playback of a tape. Press
again to place in the TV position
("VCR" indicator on the VCR will go
OFF) to view one program while
recording another program.
When used with the TV the TV/VCR
button works as a source button. Each
press cycles the TV between channels
3/4; the last view channel; ANT A/B
inputs, and any AUX(iliary) Input
mode (if it has been connected.) It is a
quick one-button way to select these
channels and modes (without directly
entering the TV*s Menu system.)
Play Button
Press to playback a tape. Hold down
after pressing the RECORD button to
start a recording.
Stop Button
Press to stop the tape.
Fast Forward Button
Press to rapidly advance the tape. For
some VCRs you may need to press
STOP first then FF. In Playback
mode hold button down to view the
picture moving rapidly in the forward
direction.
Channel Scan Buttons
Press to scan up or down through
VCR channel numbers.
Number Buttons
Press buttons for direct VCR channel
selections.
VCR System Button
Press to send remote commands to
the VCR.
Power Button
Press to turn the VCR ON and OFF.
S
m a r i
Hi i.p
Remember, the VCR
%
buttons on the remote will
not operate your VCR if those
features are not already found on
your VCR remote control.
Note: All VCR functions
(particularly Search, Rewind, Fast
Forward, etc.) will operate the
same as with the original VCR
remote control provided with the
VCR.
41