Philips VR 588 - Manual (Page 5)

17 ► ► (Fast forward) / ► /OK
button
Before using this button, press VCR.
• After pressing VCR;
- Fast forward the tape. Also during
playback, starts rapid forward
visual search. (>FP.14)
- Selects the items on the menus or
goes to the next menu screen when
using the menus. (>)-P.ll)
18 STOP H / T button
• Stops the tape. (»FP. 14)
• Moves down the cursor when using
the menus. (>)-P.ll)
19 SLOW/FORWARD + button
During a slow motion picture, adjust the
playback speed in the forward direction.
(^P.16)
20 MENU button
Before using this button, press VCR.
• After pressing VCp, calls up the
main menu. (»FP.ll)
21 TIMER button
Display the Timer Recording menu.
(•FP.17)
22 Number buttons
(0,1,2,3,4, 5, 6,7, Sand
9)
Before using these buttons, press VCR.
• Press to select a channel on the VCR.
To select channels 1 to 9, press 0
then the channel you want. For
example, for channel 4, press 0 then
4.
• Also used to programmé the Timer
Recordings. (•fP.17)
23 CLEAR button
Erases unwanted timer programmes.
(•fP.18),
24 AUDIO/MUTE button
For some Philips TV only:
Turns off the
t V sound.
25 INDEX / ► ► buttons
Locates an index marked at the
beginning of every recording. (*>-P.15)
To insert the batteries:
1
Remove the battery compartment lid
from the bottom pf the remote
control.
2
Install two batteries —R6(SUM-
3)/AA — matching polarity
indicated inside the battery
compartment
Replace the lid.
Note:
This remote control and batteries are .
supplied accessories.
Check to make sure they are included.^
Also, check “Specifications” to see what
other accessories are included.
1- CAUTION
On Battery Replacement
Do not mix old and new batteries.
(Also never mix alkaline batteries
with manganese batteries.)
- 5 -