Philips VR 588 - Manual (Page 19)

Tape Duplication
Connection
Diagram
Playing VCR
1 Connect the recording VCR (this VCR) and the playing
VCR.
2 Connect the recording VCR (this VCR) to the TV.
Recording VCR (this VCR)
^ SCART cable (not supplied)
Dubbing from any VHS VCR (or video
camera) to another is simple.
Explanations on this page uses this
VCR as the recording VCR.
Refer also to the manual supplied with
the other VCR (for playback).
• You can also use the AUDIOATDEO
input jacks on the front panel to
connect another VCR or video
camera. If you use these jacks on the
front panel, they have the priority
, over the ones on the rear panel.
Make sure....
• To record from the AUDIOATDEO
IN jacks on the rear panel, make sure
no connection is made to the
AUDIO ATDEO input jacks on the
front panel.
• The remote control operation mode
is set correctly for operating your
target component.
- Press VCR to operate the VCR.
- Press TV to operate the TV.
• ONLY FOR VR3S8/55; This VCR
can record a tape only in SP (Stand­
ard Play) mode. You cannot select
the tape speed even if you press
SPEED.
ll At VCRs
Insert a source tape in the playing VCR
and a blank tape in the recording VCR.
• If a tape without the record tab is inserted
in the playing VCR, playback automati­
cally starts. In this case, press the STOP
button.
• If the VCR indicator on the recording
VCR (this VCR) does not light up, press
VCR/TV once.
^AtTV_________________________
Turn the channel on the TV to your
video channel.
a
Select Line Input
Press CH A or T, pointing the remote
control at this VCR, to select the
external line input.
• For rearjacks, select “L-1” on the
display or “A/V REAR” on the TV
screen.
• For front jacks, select “L-F’ on the '
display or “A/V FRONT” on the TV
screen.
Select Tape Speed
Press SPEED, pointing the remote
control at this VCR, until the desired
tape speed {SP, LP or SLP (For NTSC
tape only)} appears on the display.
Play Back Tape
Press the PLAY ► button on the
playing VCR.
S Record (Copy) Tape_______ _
Press REC/OTR, pointing the remote
control at this VCR.
Remember: press the buttons in steps 5
and 6 simultaneously to avoid missing ;
any of the recording.
— 19 —