Philips VR 588 - Manual (Page 18)

DVANCED ©PERATIONS
(C ontinued )
P
Select Recording Type_______
If you want to record the same
programme daUy, press DAILY
(Number button 8).
The VCR will record a TV programme
ever}' day (Monday through Friday) at
the same time and length. (Daily
Recording)
If you want to record the same
programme weekly, press WEEKLY
(Number button 9).
The VCR will record a TV programme
once a week at the same day, time, and
length. (Weekly Recording)
If you want to cancel the currently
set programme, press CLEAR.
P
Confirm Programme_________
Press EXIT/STATUS.
“PROGRAM WAS COMPLETED”
appears on the TV screen.
After 5 seconds, the above message
disappears, and the normal TV picture
resumes. The © (Timer) indicator
lights up on the display.
• If-PROGRAM NOT COMPLETED”
appears, tr}' again from step 1.
If you want to store other
programmes, repeat steps 1 to 8.
t j Finish Settings______________
Press POWER to turn off the VCR.
After a timer recording has
taken place
Press POWER to turn on the VCR.
You can operate your VCR normally.
To stop a started timer
recording
Press POWER.
Recording stops and the VCR turns off.
If it is a Daily or Weekly Recording,
future recordings will be carried out as
programmed.
Useful function for Timer
Recording: Auto Tape Speed
With this function activated, the VCR
can change the tape speed and record
the programme in SLP mode unless
enough tape remains for recording in
SP mode.
1 Press VCR.
2 Press MENU.
3 Press
A or T to select “VCR SET
UP” then ►.
4 Press A or T to select “TIMER REC
SPEED.”
6 Press OK/^.
Each time you press the button, the
setting changes.
AUTO:
Select this to allow the VCR to
change the tape speed from SP to
SLP when there is not enough tape
length remaining.
MANUAL:
Select this not to allow the VCR to
change the tape speed.
7 Press EXIT/STATUS to exit from
the menu operations.
To check, edit or erase the
programmes
1 Turn on the VCR and TV.
2 Press VCR.
3 Press TIMER.
4 Press
A or T to
select
“PROGRAM
REVffiW” then
press OK/^.
The list of the timer recording
programmes
appears.
5 Press OK/>-
repeatedly to view
the more detailed
programme information.
• When you press the button for the first
time, the detailed programme
information for Programme 1 appears.
By pressing this button repeatedly, you
can review the detailed information of
all other programmes.
PR Crt START STOP DATE
1 L-f CScCO 10 w d : cio
2 L-T tXO TO 45 vcr;
3 12S njTCi' OKO DALY
4 45 iS-iO 15-15 V.1C.16
5
s
7
t ; ext =^ Ef,D=£>.iT
OXETiVEPaOS!».».’.! FEOSRyi 1
CRU.'.a»'- 12
STfKI..^ C3 25
3T0?,;-
05 20
FEC SPEED LF
D.\TE+'-
07EF53
FF DAY
SET0i-'LYiS03V.EerCLYC3
TO EM> PUSH EXT______
6 If you want to change the
programme setting shown on the
TV screen, press the following
buttons:
CH
A/T: Changes the channel.
START +/—: Changes the start time.
STOP +/—: Changes the stop time.
SPEED ; Changes the tape speed.
DATE +/—: Changes the date.
If you want to erase the
programme setting showii on the
TV screen, press CLEAR. The
detailed information of the next
programme appears.
7 Press EXIT/STATUS to exit from the
menu operations.
Note:
This function does not work for OTR (One
Touch Recording).
How to see the programme
list
PR CH START STOP DATE
12 03:30 09:30 D07/31
13 10 00 10:45 MOM
125 11:30 01:00 DAILY
45 15-00 15:15 W05'16
7
8
NEXT=>- EMD=E
© Programme numbers
© Preset channel numbers
® Start time
® Stop time
® Start date
“D” stands for “DAILY,” and “W”
stands for “WEEKLY.”
• If the programme has w’orked
once for the Daily recording.
“DAILY” will be shown instead
of the start date.
• If the programme has worked
once for the Weekly recording,
the day of the week (in this
example, “MON”) will be shown
instead of the start date.
— 18-