Philips STU 801/25R - Manual (Page 7)

This satellite receiver operates within the range of 220-240V ~ 50Hz mains
supplies, Do not connect to DC mains.
TO AVOID THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE
COVER OF THIS EQUIPMENT WITHOUT FIRST DISCONNECTING IT
FROM THE MAINS SUPPLY.
Mains lead plug connections
The mains lead supplied with this receiver is terminated at one end with a
connector to be inserted into the mains input socket on the receiver rear panel.
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Blue Neutral
Brown Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the colour markings
identifying the terminals in your plug, proceed as follows:
The blue wire must be connected to the terminal marked with the letter N or coloured black.
The brown wire must be connected to the terminal marked with the letter L or coloured red.
DO NOT connect either the blue or brown wire to the terminal marked by the letter E or by the safety earth
symbol -i- or coloured green or green and yellow.
A fused plug must be fitted with a 3A fuse complying with BS 1362. If you are using a non-fused plug, an
external fuse must not exceed 5 A.
IF IN DOUBT, CONSULT A COMPETENT ELECTRICAN.
Connection To Mains ___________