Flintec FT-16D V.1.02 - Manual (Page 24)

If a 2 nd scale is connected, the program will ask for the scale to provide the weight data before capturing any
weight data (1 st weighing, 2 nd weighing and one-pass weighing).
For example:
Example 1
st
weighing menu
Like shown on the right small window the current active scale is scale no.1. To change the scale providing
active weight data, press the [F1] key. Then press the “Enter” key to get the weight.
7.10 Using the Scale Instruction
This instruction screen will be displayed for 15 seconds each time the terminal is powered on.
To alter the text, press [F10] in the setup & records menu to access the using the scale instruction window.
Using the scale instruction
Here you can write some instructions for the operator or create for example a “welcome” screen.
The [F1] key is used to clear the instruction.
FT-16/FT-16D Weighbridge User Manual, Rev.1.02 June 2008 Page 24 of 24