Flintec FT-16D V.1.02 - Manual (Page 12)

This determines if the previous data of this query is preserved for the next record or not.
“1”: The data of the previous weighing will be preserved for the next weighing.
“2”: The entry will be empty and new data has to be entered in the next weighing process.
Definition:
The program allows simple mathematical operations for each entry.
Possible operations: division (/), multiplication (*), addition (+) and subtraction (-)
Possible variables:
#X:
Provides the data of entry X. (X is the query/entry number)
#N: Provides the net value of the actual weighing
#T: Provides the tare value of the actual weighing
#G: Provides the gross value of the actual weighing
Example “Determining the price of incoming or outgoing material”: Define an entry for the
unit price (Entry 4) and another one for the total price (Entry 5). The total price is the
multiplication of the unit price and the net weight. So the formula in the definition field of the
entry 5 has to be: “#4 * #N“. As soon as the weighing process is finished the total price will
be calculated and saved with the other entries.
Manufacturer
company: In this field the scale manufacturer company information can be entered by pressing the
function key [F3]. The data written in this field will be seen as a bottom line on nearly every
screen. It is also possible to set this line as the bottom line for printouts. For doing this “2”
or “3“ has to be entered in the “Print on Ticket” section.
Anyhow instead of using the manufacturer name for example a “THANK YOU” message
could be inserted.
7.2 Table Data
In this menu you can create tables for each entry/query. So it is not necessary to type in all data each time.
To access the table data menu press [F2] in the setup & records menu.
Table data menu
Press function keys [F1] to [F6] to add, delete or edit the data of each entry.
FT-16/FT-16D Weighbridge User Manual, Rev.1.02 June 2008 Page 12 of 24