Flintec FT-16D V.1.02 - Manual (Page 11)

7. S ETUP & R ECORDS
To access the setup & records menu press [F6] in the main menu.
The standard
password to enter the sub-menus is “1”. (The password can be changed in chapter 7.8).
Setup & records menu
7.1 Company Data & Entries
To access the company data and to configure the entries in the weighing menu press [F1] in the setup &
records menu.
Company data & entries
Company data:
To enter the company data press [F1]. Three lines are available for data. When leaving a
line you will be asked for the “Print on Ticket” section. Here you can select if and how the
line will be printed. („1“ = no printout; „2“ = bold printout; „3“ = normal printout). However
the company data area can also be used to define any header for the ticket.
Entries: The weighing data queries can be defined in this section. The user can freely define up to
6 entries (Some other queries of the weighing process, like the license tag, are fixed and
cannot be altered). Press [F2] to enter new entries or to edit them. The description and the
use of the fields are described on the following page.
Entries:
Here the entry headers which will be seen in the weighing menus can be entered.
Hold Previous:
FT-16/FT-16D Weighbridge User Manual, Rev.1.02 June 2008 Page 11 of 24