Flintec FT-13 - Manual (Page 30)

FT-13 Technical Manual, Rev. 1.40 March 2013 Page 30 of 56
7.5 Recipe Memory
A recipe is a set of parameters for different materials and/or different target weights. 16 different recipe
components which are target, tolerance, coarse lead-in, mid-feed and fine values can be stored to the recipe
memory. You can select the wished recipe from the memory by use of the keypads before the filling will start.
ENTER A RECIPE TO THE MEMORY
+
Press and <8> keys sequentially.
Enter the recipe number (1 to 16) to edit by using the
numeric keys and press .
Target message and it‟s value are shown alternately.
To edit the value use the numeric keys and press .
To hide a recipe enter “0”.
+ / - tolerance of filling or discharging are shown.
To edit the value use the numeric keys and press .
The coarse lead-in value is shown on the display.
To edit the value use the numeric keys and press .
The mid-feed lead-in value is shown on the display if 3-
speed feeding is enabled.
To edit the value use the numeric keys and press .
The fine lead-in value is shown on the display.
To edit the value use the numeric keys and press
to return to the operation
Press to save the recipe and
then press the key to exit.
RECALL A RECIPE FROM THE MEMORY
or
Press the <8> key.
To reach the recipe you want, use the arrow < > and < >
keys. Press to choose the recipe for the next filling
process.
MiddLE XXXXX
toL XXXXX
rEC. XX
tArGRt
XXXXX
CoArSE XXXXX
FınE
XXXXX
rEC. XX