Dynaflite DYFA2016 - Manual (Page 5)

A flat, durable, easy-to-handle sanding tool is a
necessity for building model airplanes. Great Planes
makes a complete range of Easy-Touch" Bar Sanders
and replaceable Easy-Touch adhesive-backed
sandpaper.
For future reference, here's a list of Easy-Touch Bar
Sanders and adhesive-backed sandpaper:
5-1/2" Bar Sander (GPMR6169)
11 "Bar Sander (GPMR6170)
22" Bar Sander (GPMR6172)
12" Roll of adhesive-backed sandpaper,
80-grit (GPMR6180)
150-grit (GPMR6183)
220-grit (GPMR6185)
Assortment pack of 5-1/2" strips (GPMR6189)
• When you see the term "test fit" in the
instructions, it means you should first position
the part on the assembly without using any
glue. Slightly modify or "custom fit" the part as
necessary for the best fit.
• Whenever just "epoxy" is specified, you may
use either 30-minute epoxy or 6-minute epoxy.
When 30-minute epoxy is specified, it is highly
recommended that you use only 30-minute
epoxy because you will need either the working
time and/or the additional strength.
• Do not throw away any leftover material until
after you have completed your Bobcat. Some
small pieces of leftover balsa or plywood are
used during construction.
Balsa Basswood Plywood
Inch Scale
Metric Scale
5