Dynaflite DYFA2016 - Manual (Page 4)

REQUIRED SUPPLIES
AND TOOLS
REQUIRED ACCESSORIES
These are the items "not included" with your kit, that
you will need to purchase separately. Items in
parentheses (OSMG2691) are suggested part
numbers recognized by distributors and hobby
shops and are listed for your ordering convenience.
GPM is the Great Planes® brand, TOP is the Top
Flite® brand and HCA is the Hobbico® brand.
4 Channel Aircraft Radio System with 1 or 2
standard, mini or micro servos and 1 mini or
micro servo
2-Meter Hi-Start Launch System
Approximately 2 rolls Top Flite MonoKote®
covering
1 /4" Latex Foam Rubber Padding
(HCAQ1000)
1/16" Foam Wing Seating Tape
(GPMQ4422)
#64 Rubber Bands (1 /4 Ib box - HCAQ2020)
(3 sets) 36" Flexible Cable Pushrod for
Elevator and Ailerons (GPMQ3702)
36" Solid Wire Pushrod Set (optional) for
Steerable Rudder (GPMQ3716)
(1 pc.) 2-56 Nylon Clevis (optional) for
Steerable Rudder (GPMQ3800, pkg. of 2)
(3 pcs.) Standard Solder Clevises (for .074
wire/cable) (GPMQ3810, pkg. of 2)
(1 pc.) 1/16" Threaded Ball Link for Aileron
Servo (GPMQ3842)
(2 pcs.) 2-56 Screw-Lock Pushrod Connectors
(GPMQ3870, pkg. of 2)
2 oz. Thin CA (GPMR6003)
2 oz. Medium CA+ (GPMR6009)
CA Applicator Tips (HCAR3780)
CA Accelerator (GPMR6035)
30-Minute Pro Epoxy (GPMR6047)
#1 Hobby Knife Handle (XACR4305)
#11 Blades (Qty 100. - HCAR0311) or (Qty.
5-XACR2911)
Hobbico Builders Triangle (HCAR0480) or
similar
Medium T-pins (HCAR5150)
Wax Paper
Electric Drill
Drill Bits: 1/16", 3/32", 5/32", 3/16", #36
(or 7/64"), 11/64" (or 5/32")
#1 Phillips Screwdriver
Top Flite Covering Iron (TOPR2100)
Hot Sock'" (for your covering iron, TOPR2175)
Single-edge Razor Blades (100, HCAR0312)
Denatured or IsopropyI Alcohol (for epoxy
clean-up)
HobbyLite" Balsa Filler (HCAR3401)
Bar Sander or Sanding Block and Sandpaper
(coarse, medium, fine grit - see next page)
These are the building tools and adhesives that you
will need to build your Bobcat.
We recommend Great Planes Pro™ CA and Epoxy
4