beautypg.com

General information, Data specification, If a fault develops – Drawmer HQ-r Remote User Manual

Page 15: Contacting drawmer, Precision pre-amplifier / dac

background image

15

DRAWMER HQ O

PERATOR’S

M

ANUAL

IF A FAULT DEVELOPS

For warranty service please call Drawmer Electronics Ltd. or
their nearest authorised service facility, giving full details of
the difficulty.

A list of all main dealers can be found on the Drawmer
webpages.

On receipt of this information, service or shipping instructions
will be forwarded to you.

No equipment should be returned under the warranty without
prior consent from Drawmer or their authorised representative.

For service claims under the warranty agreement a service
Returns Authorisation (RA) number will be issued.
Write this RA number in large letters in a prominent position
on the shipping box. Enclose your name, address, telephone
number, copy of the original sales invoice and a detailed
description of the problem.

Authorised returns should be prepaid and must be insured.

All Drawmer products are packaged in specially designed
containers for protection. If the unit is to be returned, the original
container must be used. If this container is not available, then
the equipment should be packaged in substantial shock-proof
material, capable of withstanding the handling for the transit.

CONTACTING DRAWMER

Drawmer Electronics Ltd., will be pleased to answer all
application questions to enhance your usage of this
equipment. Please address correspondence to:

Drawmer (Technical Help line)
Coleman Street
Parkgate
Rotherham
S62 6EL
UK

Alternatively contact us by E-mail on :

for sales enquiries: [email protected]

or for technical issues: [email protected]

Further information on all Drawmer dealers, Authorised service
departments and other contact information can be obtained
from our web pages on:

http://www.drawmer.com

GENERAL INFORMATION

INPUT

Maximum Input Level

Balanced

+21dBu

Unbalanced +21dBu

Input Impedance

Balanced

10kOhms

Unbalanced 10kOhms
RIAA

47kOhms

DIGITAL INPUT SAMPLE RATE

AES/EBU

upto 24bit / 192kHz

TOSLINK

upto 24bit / 192kHz

USB

upto 16bit / 48kHz

S/PDIF

upto 24bit / 192kHz

AES3id

upto 24bit / 192kHz

OUTPUT

Maximum Output Level

Balanced

+27dBu

Unbalanced +21dBu
Headphones +21dBu

Output Impedance

All Outputs

33 Ohms

FREQUENCY RESPONSE

20Hz to 20kHz +/- 0.1dB

DYNAMIC RANGE

TYPICAL 113.5dBfs Unweighted

CROSSTALK

>100dB @ 20Hz to 20kHz

HQ

PRECISION PRE-AMPLIFIER / DAC

DATA SPECIFICATION

Left/Right Balance

<0.1dB of ERROR

THD & NOISE

Typically

>-100dBfs for all I/P’s & O/P’s

POWER REQUIREMENTS

230Volt or 115V at 50-60hZ, 40VA

FUSE RATING

T500mA for 230Volt, T1A for 115Volt
Conforming to IEC 127-2

FUSE TYPE

20mm x 5mm, Class 3 Timed-Blo, 250Volt working

REMOTE SIZE

250mm (W) x 88mm (H) x 82mm (D)

REMOTE WEIGHT

0.8Kgs

CASE SIZE

(with ears and feet fitted)

482mm (W) x 104mm (H) x 307mm (D)

CASE WEIGHT

6.6Kgs