DLE 30 - Manual (Page 8)

8
4. Install the throttle servo at least 12” [305mm] away from the engine.
Make sure that you get the carburetor’s full range of rotation with
your servo travel. Be sure to use a non-metallic linkage.
5. Install the choke servo (optional) at least 12” [305mm] away from
the engine. Be sure to use a non-metallic linkage.
6. Connect the ignition wire from ignition module to the spark plug.
7. Install the muffl er onto the engine. Be sure to use threadlocker
and that the ignition wire does not contact the muffl er.