Digilent 240-042P-KIT - Manual (Page 8)

SRK Reference Manual
www.digilentinc.com page 8 of 9
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
11. Remove the other piece of backing from the Velcro and attach the battery case.
12. Connect the open ends of the two pin MTE battery cable to the blue screw terminal on the
PmodCON3 (J6). Take care that the red wire goes in the ‘+’ side of the screw terminal, and
that the black wire goes in the ‘-‘ side of the screw terminal. Then, attach the connector side of
the two pin MTE battery cable to the two pin header J6 on the MX3cK as shown below. Take
care that the red cable connects to the ‘+’ pin (V) and that the black cable connects to the ‘-‘
pin (G).