Digilent 410-302P-KIT - Manual (Page 14)

WiFire Reference Manual
12 Pinout Tables
The following tables show the relationship between the chipKIT digital pin numbers, the connector pin numbers,
and the microcontroller pin numbers.
In the following tables, columns labeled chipKIT pin # refer to the digital pin number. This is the value that is
passed to the pinMode(), digitalRead(), digitalWrite() and other functions which refer to the pin.
12.1 Pinout Table by ChipKIT Pin Number
ChipKIT
Pin #
MCU
Pin
Port
Bit
PIC32 Signal Name Function
0 57 RF02 EBIRDY3/RPF2/SDA3/RF2 GPIO, U4RX
1 58 RF08 EBIRDY2/RPF8/SCL3/RF8 GPIO, U4TX
2 18 RE08 AN25/AERXD0/RPE8/RE8 GPIO, IC1, INT1
3 71 RD00 EMDIO/AEMDIO/RPD0/RTCC/INT0/RD0 PWM 1, INT0, OC1
4 60 RA03 EBIRDY1/SDA2/RA3 GPIO
5 76 RD01 RPD1/SCK1/RD1 PWM 2, OC2
6 77 RD02 EBID14/ETXEN/RPD2/PMD14/RD2 PWM 3, OC3
7 19 RE09 AN26/AERXD1/RPE9/RE9 GPIO, IC2, INT2
8 66 RA14 AETXCLK/RPA14/SCL1/RA14 GPIO, IC3, INT3
9 78 RD03 EBID15/ETXCLK/RPD3/PMD15/RD3 PWM 4, OC4
10 16 RG09
EBIA2/AN11/C2INC/ERXCLK/EREFCLK/AERXCLK/AEREF
CLK/RPG9/PMA2/RG9 SPI_SS2, PWM 5, OC9, IC6
11 70 RD11 EMDC/AEMDC/RPD11/RD11
SPI_SDO2/SDI2 PWM 6,
OC7
12 85 RF00 EBID11/ETXD1/RPF0/PMD11/RF0 SPI_SDI2/SDO2, T5CK(+)
13 10 RG06 AN14/C1IND/ECOL/RPG6/SCK2/RG6 SPI_SCK2, USER LED1
14 20 RB05 AN45/C1INA/RPB5/RB5 AIN0, GPIO
15 33 RB09 EBIA7/AN49/RPB9/PMA7/RB9 AIN1, GPIO
16 7 RC02 EBIA12/AN21/RPC2/PMA12/RC2 AIN2, GPIO
17 44 RB15
EBIA0/AN10/ERXD3/AETXD2/RPB15/OCFB/PMA0/RB1
5 AIN3, GPIO
18 11 RG07 EBIA4/AN13/C1INC/ECRS/RPG7/SDA4/PMA4/RG7 AIN4, SDA
19 12 RG08
EBIA3/AN12/C2IND/ERXDV/ECRSDV/AERXDV/AECRSD
V/RPG8/SCL4/PMA3/RG8 AIN5, SCL
20 22 RB03 AN3/C2INA/RPB3/RB3 AIN6, GPIO
21 23 RB02 AN2/C2INB/RPB2/RB2 AIN7, GPIO
22 21 RB04 AN4/C1INB/RB4 AIN8, GPIO
23 24 RB01 PGEC1/AN1/RPB1/RB1 AIN9, GPIO
24 32 RB08 EBIA10/AN48/RPB8/PMA10/RB8 AIN10, GPIO
25 25 RB00 PGED1/AN0/RPB0/RB0 AIN11,
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 14 of 23