D.A.S. Audio DSP-26 USB - Manual (Page 31)

29
5. Delay Units
When you open the power supply, pressing the button, you will select the Delay Units
screen .
Delay units can be changed for the specific application to display in:
Use the and button or rotary encoder to select the preferred measurement units.
Returning to the delay parameter will then allow the delay value to be viewed and adjusted in the
selected units.
PREV/NEXT
Milliseconds(ms)
Frames per second(24,25&40fps)
Feet/inches(ft 'ins' )
Meters(ms)
SETUP
DELAY UNITS
ms
4. Crossover Mode
This Utility allows the crossover slopes of the associated bands to be linked together for ease of setting.
For example, when in 'Both' mode changing the frequency of the Hi slope of an output channel set up
as say 'low' band will also change the frequency of the Lo slope in the adjacent 'Mid' band output
channel. The bands do not necessarily need to actually crossover at the same frequency as an offset
can be maintained between them.
Edge' mode keeps all the crossover slopes separately adjustable. This mode is useful in initial system
set up to tune a driver/cabinet's individual response.
SETUP
XOVER MODE BOTH
SETUP *
XOVER MODE BOTH
L
M
L
L
M
L
M
M
Both
Edge
OPERATION
Manual del usuario/ User´s manual DSP-26