Operation, Configuration – D.A.S. Audio DSP-26 USB User Manual

Page 27

Pressing

a second time will recall the program.

Under Utilities mode, press either

or turn the encoder clockwise, enter into the Delete Program

mode, this will change:

Choose the Program to be deleted using the

and

buttons.

Press enter to delete the Program.

Pressing the

buttons ate any time will exit the Delete Program mode.

Note: Locked Programs have to be unlocked before they can be deleted, this applies to Program lock
and OEM/Owner locks.

The configuration us the basic of the unit and is saved as ported of the Program information, along
with the Stereo Link setting associated with the mode chosen here. Changing this mode reconfigures
the overall routing and linking of the unit. The operation has to be confirmed as routing, linking,
delay linking and crossover band name date will be changed. The unit will also mute the Outputs to
ensure that appropriate bandwidth settings can be checked before continuing. The Output parameters
can now be changed including the routing, delay linking and band names as required.

A number of particular system configurations are possible using DSP-26. Select the configuration that
is closet to your needs and change the parameters as necessary. The configuration setting is saved as
part of the Program data when a setup is stored to a user memory.

To select the desired configuration use the

and

buttons or rotary encoder. This will display a

screen similar to the one shown below that asks to change the setup to the displayed configuration.

RECALL

PREV/ NEXT

1.5 Delete Program

2.1 Configuration

2. Configuration

RECALL

1 UNUSED

UTILITIES

DELETE PROS

ENTER TO DELETE

1 MONITORS

UTILITIES
CONFIG

MONO

CHANGE TO 3 WAY ?
ENTER TO CONFIRM

OPERATION

Manual del usuario/ User´s manual

DSP-26