D.A.S. Audio DSP-26 USB - Manual (Page 25)

23
RECALL SAVE/ENTER
RECALL
PREV/NEXT
RECALL
ENTER
SAVE
RECALL
and
Used to save edited Programs to a new memory location and to recall saved setups
from the internal memories.
To select a reconfigured Program press the button on the front panel. From
new the manual does not contain any preset Programs but, if the unit has been used
before it may contain user preprogrammed setups. Use the buttons
located on the left side of the LCD screen to choose the correct Program. Press
again to enable the Program.
The save key is also used as an button to confirm certain operations.
Pressing the key when in recall mode will exit the operation and pressing
in a save operation will achieve the same result.
Mute
Press any of the front panel keys to toggle the channel in and out of mute. The
button will light red when the output is muted.
Mute
LCD Display
DIGITAL SPEAKER
MANAGEMENT
This display can generally be addressed in four working areas:
1. The top left shows the mode that the DSP-26 is in ( Input or Output)
2.The button left displays the currency the currently selected parameter associated with the above
mode.
3.The button right area indicates the value associated with this parameter.
4.The top right only displays information relating to the current state of the DSP-26.
IN SUM A+B *
Delay 2.14ms
Mode
Parameter
Information
Value
FRONT PANEL
Manual del usuario/ User´s manual DSP-26