Comtrol DM ATS-XPe - Manual (Page 47)

Certified PCMCIA Adapters 47
Linksys EtherFast 10/100 + 56K Modem PC Card (PCMLM56)
11. To configure the card exclusively for a specific network, select View Available
Wireless Networks.
12. Highlight the appropriate network connection and Advanced.
13. Select Access point (infrastructure) networks only and Close.
14. Select Ok to close the Wireless Network Connection Properties window and
close the Network Connections control panel.
15. Go to Configuring the Network Settings on the ATS-XPE on Page 9 to configure
the card for your network.
Linksys EtherFast 10/100 + 56K Modem PC Card (PCMLM56)
Although the Linksys PCMLM56 driver for this adapter is pre-configured into the
ATS-XPE as COM3, you must start remote access service and you may need to
select a country code if you are using it outside North America.
See Starting Routing and Remote Access Services on Page 13 and Setting Up Dial-
In on Page 15, if necessary to complete the configuration.
For support of the card, see http://www.linksys.com .