Comtrol VS3000S - Manual (Page 13)

Ordering the ISDN Line 13
Working with the Phone Company
This section discusses ordering the ISDN line and collecting
information needed for software installation
Ordering the ISDN Line
For your ISDN installation to go smoothly, use the table below to
record information from your service provider.
Note: For North American installations, your ISDN line should follow
the NIUF generic U package (unless it is cost-prohibitive). This
package is often referred to as Easy ISDN or EZ-ISDN1. In
some cases, this service is also referred to as Basic Rate (2B+D)
ISDN service. With 2B+D, make sure that you order the version
that has EKTS (electronic key touch service) disabled or that it
does not include EKTS (such as, ring indicator).
Record the following information as supplied by your ISDN service
provider. In most cases, this information should be posted at the
demark location.
Table 1. ISDN Software Installation Information
Description Value
ISDN Installation Type (for
example, EZ-ISDN1)
o EZ-ISDN1
o 2B+D (without EKTS)
o Other____________________
ISDN Line Type o BRI
ISDN Help Desk Phone Number
Circuit ID
Switch Vendor (hardware type)
o ATT 5ESS
o Nortel DMS-100
o Siemens (EuroISDN)
Network Type (software)
o National ISDN1 (NI-1)
o ATT Custom
o DMS-100 Proprietary (NI-1)
o EuroISDN (NET3)