COMP Cams 5449 Ford 3 Valve Cam Phaser Limiter Kit - Manual (Page 3)

COMP Cams®
3406 Democrat Rd.
Memphis, TN 38118
Phone: (901) 795-2400 Fax: (901) 366-1807
www.compcams.com
Part #COMP4-119
Revised 6/13/08
What camshaft profiles has COMP developed to work with the Cam Phaser Limiter Kit?
The Cam Phaser Limiter Kit unlocks the door to safely use much more powerful camshaft grinds. COMP Cams® spent a
tremendous amount of engine dyno time testing and developing these designs for maximum power, torque and reliability.
Three stages of cams are currently available for naturally aspirated engines, as well as an additional three stages of cams
specifically designed for blower equipped engines. Along with these premier camshaft sets, a complete line of valve springs
and retainers are available that round out the matched performance package.
INSTALLATION INSTRUCTIONS
Note: These instructions give a very basic overview of what is required to install the COMP Cams® Ford 3Valve
Cam Phaser Limiters. They in NO WAY replace the VERY specific factory instructions for removing and replacing
the camshafts. Failure to follow the specific factory recommended instructions for removal and replacement of the
camshafts during the installation of these cam phaser limiters can lead to incorrectly timed camshafts and result in
engine damage.
MECHANICAL
Step 1: We are going to show you the installation basics on the passenger side of the engine; simply repeat the same
procedure on the driver’s side of the engine.