COMP Cams 13702-KIT Rocker Arm Trunion User Manual
Instructions, Installation instructions
COMP Cams
®
3406 Democrat Rd.
Memphis, TN 38118
Phone: (901) 795-2400 Fax: (901) 366-1807
www.compcams.com
Part #COMP4-126
Revised 4/10/12
#13702-KIT Rocker Arm Trunion Upgrade Installation Kit
(LS1/LS2/LS3/LS6/LS7)
Thank you for choosing COMP Cams
®
products; we are proud to be your manufacturer of choice.
Please read this instruction sheet carefully before beginning installation, and also take a moment to
review the included limited warranty information.
Note: Assembly requires the use of a press and snap ring pliers.
Wear Safety Glasses.
Installation Instructions:
1. Wearing your safety glasses, use an appropriate size driver
and die in the press to cradle your OEM rocker arm. Set the
rocker are on top of a die with a .900 in. hole to allow the
trunion to pass through, be sure to set the flat side of the
rocker arm against the die.
INSTRUCTIONS
Want to see a video of these
instructions? Scan the QR
code
below
or
visit
cpgnationtv.com
#13702-KIT Parts List
(16) Rocker Arm Trunion
(32) Rocker Arm Bearing
(32) Rocker Arm Retaining
Clips
(16) Rocker Arm Bolts
(2) Assembly Washers