COMP Cams 7153-5 Stock Timing Chain Removal User Manual
Instructions

COMP Cams®
3406 Democrat Rd.
Memphis, TN 38118
Phone: (901) 795-2400 Fax: (901) 366-1807
www.compcams.com
Part #COMP4-108
Revised 5/14/07
#7153, 7153-5 Stock Timing Chain Removal and Double Timing Chain Install
Thank you for choosing COMP Cams® products; we are proud to be your manufacturer of choice. Please read
this instruction sheet carefully before beginning installation, and also take a moment to review the included
limited warranty information.
Stock Timing Chain Removal
1. Remove front accessories.
2. Remove timing chain cover and roll your engine over until it’s dot to dot.
3. Remove oil pan bolts, leaving the rear one on each side only halfway out. This allows the oil pan to drop
down so that you may gain access to remove pickup tube bolt (10mm).
INSTRUCTIONS