Clippasafe 118/1 Extendable, Dual Fix Push to Lock Gate User Manual
Page 7
3
2
1
9. To open the gate, press and hold the foot pedal with
your foot (1). Holding the gate in the middle of the top bar,
push down (2) and finally lift the gate to remove it from
the opening (3).
10. Ensure that the gate and the pedal are level and in the centre of the gap when installed
and closed. Adjust the spindles at each corner to ensure that the gate is level with the ground.
Please make sure that the barrier is properly closed after each use.