Clippasafe 118/1 Extendable, Dual Fix Push to Lock Gate - Manual (Page 2)

Pre-Installation Advice
WARNING - Never use without wall cups
WARNING - Gate must be fitted upright as shown
WARNING - Do not use the safety barrier if any of the
components are damaged
or missing
The surfaces which the gate
rests on should be completely
flat and should be a minimum
of 5cm wide.
WARNING - INCORRECT FITTING OR
POSITIONING OF THIS SAFETY BARRIER
CAN BE DANGEROUS
The gate must be fitted in a structurally
solid opening, free of dirt and grease.
The position of the safety barrier in relation
to the stairs may have an adverse affect on
your child’s safety:
- If the barrier is used at the top of the
stairs to prevent your child from falling
down the stairs, it must not be placed on
any stair below the level of the top stair.
- If the safety barrier is used at the
bottom of the stairs to prevent your
child from climbing up the stairs, it must
be placed on the lowest stair.
This product requires the purchase
of appropriate fixing aids suitable
for the surface to which the wall
cups and/or hinges are to be fitted.
LOW PRESSURE MOUNTING
WITH SCREW FIXED HINGES
AND WALL CUPS
5cm min