CLEAR 4G+ Personal Hotspot Users Guide - Manual (Page 11)

10
Manage your CLEAR Spot (continued)
CLEAR Spot Home Page / Connected
Use this window to view and change the CLEAR Spot’s connection preferences.
To open the Connected window, click the graphic icon on the CLEAR Spot Home Page.
Note: To change your connection preferences, you must be logged in to the CLEAR Spot Home
Page.
You can choose:
 4G Only: Not recommended – connection can be established only to 4G.
 4G Preferred: This is the recommended setting – the CLEAR Spot automatically will search first
for the CLEAR 4G signal. If a CLEAR 4G signal is not available, the CLEAR Spot will search for
an available 3G signal
 3G Only: Not recommended – connection can be established only to 3G.
 Connect Automatically: Select to connect automatically to the network when the CLEAR Spot is
turned on, or upon loss of network connection.
When you’re ready to set your connection preferences, click “Save” and you’ll see the CLEAR Spot
Home Page.
If you don’t desire to make any changes, click “Cancel” and you’ll see the CLEAR Spot Home Page.
The window also displays the active network type, signal status, and signal strength (similar to the
information that is displayed in the Signal Strength window); however, the primary purpose is for you
to view and change your CLEAR Spot connection preferences.
Note: The Connected link appears on every window of the CLEAR Spot Home Page.
If you’re using your
CLEAR Spot and are
connected to the
internet, click here to
open the CLEAR Spot
Home Page.