Cable tv connections setting language – JVC TV 13140 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CABLE TV CONNECTIONS

SETTING LANGUAGE

This TV/VCR has an extended tuning range and can tune most cable channels without using a Cable TV converter

box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these

signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.

This TV/VCR can display the on screen language in English, Spanish or French.
Language selection {step 3) will automatically appear on the screen when you press the MENU button
initially. Select language to use the other menu options.

FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE

For basic cable service not requiring a converter/descrambler box,
connect the CATV 75 ohm coaxial cable directly Ic the antenna jack

on the back of the TV/VCR.

FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE

If you subscribe to a cable TV service which requires the use of a converter/descrambler box, connect the incoming

75 ohm coaxial cable to the converter/descrambler box. Using another 75 ohm coaxial cable, conned the output jack
of the converter/descrambler box to the antenna jack on the TV/VCR. Follow the connedions shown below. Set the
TV/VCR to the output channel of the converter/descrambler box (usually channel 3 or 4) and use die converter/
descrambler box to seled channels.

Press the MENU button.
Press the SET + or - button to select the
SYSTEM SET-UP option, then press die
ENTER button.

SET*

MENU

ttiMERflECSET

ITVSET-gp
■ CHSET'UF'

UJTOREPEJt

SVSTEM

(eWENTEFWENU)

Press tti

SET + or - button to select the

LANGUAGE option, then press the ENTER

button.

SET*

SYSTEM

■a OCX SET

LilNQUAOEVIOUAiLAMGUE

<^1

-ÏLM

<4i-^MTEfl«ENU)

INCOMING

75 OHM
CATV CABLE

75 OHM CABLE

CONVERTER/

DESCH/U4BLER

VHP

UHF

FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH

SCRAMBLED PREMIUM CHANNELS

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a converter/descrambler box, you may wish to use a signal splitter and an A

switch box (available from the

Cable company or an electronics supply store). Follow the connections shown below. With the switch in the "B"

position, you can directly tune any nonscrambled channels on your TV/VCR. With the switch in the “A” position, tune

your TV/VCR to the output of the converter/descrambler box (usually channel 3 or 4) and use the converter/
descrambler box to tune scrambled channels.

Press the SET '»-or - button to select the
desired language: English (ENGLISH), Spanish
(ESPAÑOL) or French (FRANÇAIS), then press
the ENTER button.

Press the MENU button twice to return to
normal TV viewing.

LWGUAâE«l(MAiUMGUE

E$PAA0L

FRfMCtu;

<4l.ÆNTEFU|ie«J)