JVC TV 13140 - Manual (Page 27)

REMOTE CONTROL
10
11
12
13
14
15
16
22
23
24
25
26
DESCRtPTION OF CONTROLS
1. TIMER Button - Used to set the TV/VCR to start
recording at a preset time,
2. INPUT Selector Button - Switches the program for
viewing between the VCR and externai input sources.
3. CALL Button - Displays the present time/day of the
week, channel, counter, speed selection (and VCR
mode if VCR is playing) on the TV screen.
4. TV/CAP/TEXT Button - Switches between Caption,
Text and TV modes for Closed-Captioned programs.
5. REW (Rewind) Button • In the Stop mode, this
button rapidly winds the tape backwards. In the Play
mode, this button activates reverse search.
6. REC Button - Press once together with the PLAY
button to start normal recording. Additional presses
activate Instant Timer Recording,
7. MUTING Button - Press to turn off the sound. Press
again to turn the sound back on.
8. CANCEL Button - Press to cancel existing setups or
to restore default values.
9. ENTER Button - Press to enter selected setup.
10. POWER Button - Press to turn the TVA/CR on.
Press again to turn the TVA/CR off.
11. COUNTER RESET Button - Used to reset the
counter to 00:00:00.
12. RETURN Button - Switches between the present
channel and the last channel selected.
13. FF (Fast Forward) Button - In the Stop mode, this
button rapidly winds the tape fonward. In the Play
mode, this button activates forward search.
14. PAUSE Button - During recording, this button
temporarily stops the tape. During playback, it stops
the tape and displays a still image on the TV screen.
15. SLEEP Button - Sets the TV to turn off automatically
after up to 120 minutes.
16. MENU Button - Press to display the On-Screen menu
function.
17. SP/EP Selector Button - Sets the tape speed for
recording. ‘
18. Direct Channel Selection Buttons (0-9) - Allows
direct access to any channel.
19. Digital AUTO TRACKING Buttons - Allows automatic
or manual adjustment of tracking to minimize picture
noise during playback,
20. STOP Button - Press once to stop the tape.
21 . CHANNEL + / - Buttons - Press the + button to
change to a higher numbered channel set into memory.
Press the - button to change to a lower numbered
channel set into memory.
22. PROGRAM Button - Press to confirm the programmed
timer recording and ON/OFF timer.
23. ZERO RETURN Button - Use to stop the tape when
the counter reaches 00:00:CX).
24. PLAY Button - Press to play a prerecorded tape.
25. VOLUME + ! - Buttons - Press the + button to
increase, or the - button to decrease the volume level.
26. SET + / - Buttons - Used to select the option in the
menu or set timer recording, ON/OFF timer, channel
set, picture adjustment, auto repeat, clock and
language.
27